solar led road stud
Inside box size:145*145*105mm 1PCS/box
Carton size:70*28.5*22cm 20PCS/Carton
Solar led road stud / road marking studs
Solar LED Road Stud
Solar cell (monocrystal silicon)2V 100mAH
1.2v 600MA Ni-Hm High temperature Battery
Continuously light 72 hours after exposed
under strong sunlight for 8 hours
Flash (2Hz±20%) or constant light
Red, yellow, blue, white, green
4 pcs φ5 high bright anti-fog LED on each side
Light intensity <500Lux
Max Load Capacity
Static pressure capability>10 tons
double fix the stud with adhesive and screw
make sure it will not loose under long term pressure
1.The road stud is produced by mould in one punch, no need to assemble, which greatly improve its load capability. Solar battery, electronic component and LED indicators are sealed in road stud with special technique, the road stud is strictly water proof, which can be used on ponding road for the long run.
2. Upside of the road stud is designed with embossed parallel stiffeners which strengthen the stud and protect
solar panel from being crushed by the wheels.
3.Additional wearresisting layer is increased on the upper surface, which prevents the surface from being wear away, and improve the efficiency of solar energy transfer.
4.Intelligent control IC, imported precision potentiometer, heat-resistant highvolume rechargeable batteries
are applied in the road stud, which ensure its service life and excellent performance.
5.LED indicators are mounted in one side or double side according to customers’ requirement.
6.The road stud is designed with handgrips and screw holes on both sides, which can be installed firmly on the road.
7.Easy to install.
8.The road stud is applicable to pavement, roadside edge, kerb stone, port and so on.